Operation Manual

3. Press +/NEXT or -/PREV button to set the Hour, press MODE ENTER button to

confirm and process to next setting. The Minute digits will flash.

4. Do the same to set other settings by the sequence of: Minute, Year, Month & Date, and

Temperature Format.

Note: It will automatically exit to Clock mode if no key is pressed in 10seconds during the

setting mode. During the setting of Month & Date, you can press +/NEXT or -/PREV

button to arrange the displaying sequence as Month & Date or Date & Month when the

small icons M and D are blinking.

Indoor Temperature

Once the unit is connected, the indoor temperature will be displayed.

Press MAX/MIN button to show the MAX or MIN temperature for 5seconds, then it will

automatically turn back to indoor temperature display.

Setting the Alarm Time

Two alarm times are available for waking you up.

Setting Alarm1:

1. In the Clock mode, press MODE ENTER button once to show the Alarm1.