Instructions

EN6

Maximum/minimum values

`Press the “MEM” button once, the LCD will display maximum value of temperature/ humidity. The

LCD will display the minimum value of temperature/humidity if press once “MEM” button again after

the maximum value is displayed.

` At the same time, there are “MAX” or “MIN” displayed on the LCD.

` The temperature/humidity maximum/minimum value can be reset by pressing and holding the

“MEM” button for 3 seconds.

Please note:

` If the temperature reading is below the measuring ranges, LL.L will be displayed. If the temperature

reading is above the measuring ranges, HH.H will be displayed.

Ice alert

` The ice alert symbol appears and flashing when the outdoor temperature at –1ć to + 2.9 ć

or +30.2 to + 37.2.

Weather forecasting function

` The weather forecast is calculated from evaluation of fluctuations in the barometric pressure and

may deviate from the actual weather conditions.

` The weather station displays the following weather symbols:

Press “CH“ button

Press “CH“

Automatic