WS 9065 – Bedienungsanleitung Funktionen: ` DCF77 - funkgesteuerte Uhrzeit ` Uhrzeit im 12 oder 24 Stunden Zeitformat ` Alarmfunktion ` Schlummerfunktion (OFF(aus) oder 1~60 Minuten) ` Batterieendanzeige ` USB-Anschluss für das Aufladen von mobilen Geräten (5V1A) ` Temperatur in °C oder °F ` Luftfeuchtigkeit: Innen- und Aussenmessbereich: 20%RH ~ 95%RH ` Temperatur: — Innentemperatur-Messbereich: -9.9°C (14.
Aufbau: Wetterstation DE2
1㸸 “Light/Snooze”-Taste 2㸸 “Mode”-Taste 3㸸 “MEM”-Taste 4㸸 “+”-Taste 5㸸 “-/Wave”-Taste 6㸸 “Alarm ON/OFF”-Schalter 7㸸 Netzteilanschluss 8㸸 USB-Anschluss 9㸸 “CH”-Taste 10㸸“loop”-Taste 11㸸“rainbow”-Taste 12㸸Uhrzeit 13㸸Batterieendanzeige der Wetterstation 14㸸Innentemperatur und –luftfeuchtigkeit 15㸸Batterieendanzeige des Aussensenders 16㸸Aussentemperatur und -luftfeuchtigkeit 17: Wettervorhersage-Symbol 18: Luftdrucktrend 19: Frostalarm-Symbol 20: DST-Zeitsymbol 21: Funkempfang-Symbol 22: Batteriefachabdeckung 2
Inbetriebnahme: ` Öffnen Sie die Batteriefachabdeckung der Wetterstation ` Legen Sie 2 x AA Batterien unter Beachtung der Polarität [ “+” und “ –“ Markierungen] in das Batteriefach ein. Diese Batterien sind als Back-Up für das Netzteil gedacht. ` Verbinden Sie die Wetterstation mit dem enthaltenen Netzteil und stecken Sie das Netzteil in eine Haushaltssteckdose. ` Alle Symbole auf der LCD-Anzeige leuchten für 3 Sekunden auf und ein Signalton ist zu hören, sobald die Wetterstation mit Strom versorgt wird.
` Drücken Sie die “Mode”-Taste um die Einstellung zu bestätigen und die Stundenanzeige blinkt. Drücken Sie die “+” und die “-” Taste um die Stunde einzustellen. ` Drücken Sie die “Mode”-Taste um die Einstellung zu bestätigen und die Minutenanzeige blinkt. Drücken Sie die “+” und die “-” Taste um die Minuten einzustellen. ` Drücken Sie die “Mode”-Taste um die Einstellung zu bestätigen und die Wettervorhersage blinkt. Drücken Sie die “+” und die “-” Taste um das Symbol zum aktuellen Wetter einzustellen.
auszuwählen, wenn mehrere Aussensendersignale von der Station empfangen werden. Der Kanalschalter auf der Rückseite des Aussensenders muss passend zum gewünschten Kanal eingestellt werden. “CH“-Taste drücken “CH“-Taste drücken “CH“-Taste drücken Automatisch Automatisch “CH“-Taste drücken Automatisch Maximale/minimale Messwerte ` Drücken Sie die “MEM”-Taste und die maximalen Werte für Temperatur und Luftfeuchtigkeit werden angezeigt.
Sonnig Leicht bewölkt Bewölkt Regen Starker Regen / Gewitter Schnee ` Diese Wettersymbole sagen die mögliche Wettersituation für die nächsten 8 Stunden voraus und nicht das derzeitige Wetter. Hintergrundbeleuchtung ` Drücken Sie die “Light/snooze”-Taste während des Batteriebetriebs und die Hintergrundbeleuchtung leuchtet für 8 Sekunden auf. ` Drücken Sie die “rainbow”-Taste mehrfach um eine von 8 Farben für die Hintergrundbeleuchtung zu wählen: weiss, rot, orange, gelb, grün, cyan, blau und lila.
x x x x x nahe Baustellen inmitten hoher Gebäude in Betonbauten nahe elektrischer Geräte (Computer, Fernseher, etc) und metallischer Gegenstände in bewegten Fahrzeugen Platzieren Sie die Station an einem Ort mit optimalem Empfang, z.B. in der Nähe von Fenstern und entfernt zu metallischen oder elektrischen Gegenständen. Vorsichtsmaßnahmen x x x Der Empfänger dieses Gerätes ist ausschließlich für den Gebrauch in Innenräumen gedacht. x x x x Tauchen Sie das Gerät nicht in Wasser.
WS 9065 – Manual Features: ` DCF radio controlled time function ` Time in 12 or 24 hour format ` Alarm function ` Snooze function (OFF or 1~60min) ` Low battery indicator ` USB socket for mobile device charging(5V1A) ` Temperature in °C or °F format ` Humidity: Indoor & Outdoor measurement range: 20%RH ~ 95%RH ` Temperature: — Indoor temperature measurement ranges: -9.9°C (14.
Appearance description: Station EN2
1㸸 “Light/snooze” touch button 2㸸 ““mode” button 3㸸 “MEM” button 4㸸 “+” button 5㸸 “-/Wave” button 6㸸 Alarm ON/OFF switch 7㸸 Adapter input socket 8㸸 USB socket 9㸸 “CH” button 10㸸“loop” button 11㸸“rainbow” button 12㸸time 13㸸Weather station low battery indicator 14㸸Indoor temperature and humidity 15㸸Remote sensor low battery indicator 16㸸Outdoor temperature and humidity 17: Weather forecast symbol 18: Barometric pressure trend display 19: Ice alert icon 20: Time DST icon 21: Radio Controlled Icon 22: Battery c
Initial operation: ` Open the weather station battery compartment cover ` Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]. These batteries are intended as back-up for adapter. ` Insert the provided power adapter and connect to the power socket. ` Once the weather station is powered, all icons on the LCD will light up for 3 seconds, and you will hear a beep tone, then indoor temperature & humidity will be displayed.
Please note: ` If there is no valid operation within 20 seconds, the clock automatically returns to the normal time mode. Alarm setting ` Push the “AL” switch to the "on" position, the LCD displays the “ ” icon. At the same time issued BI-BI sound (Except for RC), the alarm function is ON. Push the “AL” switch to the "off" position, the “ ” icon will disappears from the display, the alarm function is OFF. ` Press the “mode” button once and the LCD displays alarm time.
Press “CH“ button Press “CH“ Press “CH“ Press “CH“ Automatic Automatic Maximum/minimum values `Press the “MEM” button once, the LCD will display maximum value of temperature/ humidity. The LCD will display the minimum value of temperature/humidity if press once “MEM” button again after the maximum value is displayed. ` At the same time, there are “MAX” or “MIN” displayed on the LCD. ` The temperature/humidity maximum/minimum value can be reset by pressing and holding the “MEM” button for 3 seconds.
Sunny Slightly cloudy Cloudy Rainy Heavy rain Snowy ` The weather symbols indicate the probable weather over the next 8 hours and not the current weather. Background lighting ` In battery powered mode, touch the “Light/snooze” button and the backlight illuminates for 8 seconds. ` Press the “rainbow” button to set different backlight colors, Change one color every time you press it, there are 8 kinds: white, red, orange, yellow, green, cyan, blue and purple.
x x x x x near construction site among tall buildings inside concrete buildings near electrical appliances (computers, TV’s, etc) and metallic structures inside moving vehicles Place the station at a location with optimal signal, i.e. close to a window and away from metal surfaces or electrical appliances. Precautions x x x x x x x This main unit is intended to be used only indoors. Do not subject the unit to excessive force or shock.
Guide d'utilisation - WS 9065 Caractéristiques : ` Fonction heure radio pilotée DCF ` Heure au format 24/12 heures ` Fonction d'alarme ` Fonction de rappel d’alarme (INACTIF ou de 1 à 60 min) ` Indicateur de faible niveau des piles ` Port USB pour charger des appareils portables (5V1A) ` Température en °C ou °F ` Humidité : Plage de mesure de température intérieure et extérieure : 20%HR ~ 95%HR ` Température : — Plage de mesure de température intérieure : de -9,9°C (14,2°F) à 50 C (122 F) — Plage de mesure
Description : Station FR2
1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 24: Touche tactile «rétroéclairage/rappel d’alarme» Touche « MODE » Touche «MEM» Touche « + » Touche «-/Wave» Commutateur Activer/Désactiver l’alarme Prise d'entrée secteur Port USB Touche «CH» Touche «boucle» Touche «arc-en-ciel» heure Indicateur piles faibles de la station météo Température et humidité intérieures Indicateur piles faibles du capteur distant Température et humidité extérieures Symboles de prévisions météo A
Mise en marche : ` Ouvrez le compartiment à piles de la station météo ` Insérez 2 piles AA en respectant les polarités [marques « + » et « - »]. Ces piles servent de secours pour l’adaptateur. ` Insérez l’adaptateur secteur fourni et le brancher dans une prise secteur. ` Une fois la station météo allumée, tous les icônes de l’écran LCD s’allument pendant 3 secondes, et un bip sera émis, et la température et l’humidité intérieures s’affichent.
` Appuyez sur « mode » pour confirmer votre réglage, les minutes se mettent à clignoter. Utilisez les touches «+»/«-» pour régler les minutes. ` Appuyez sur la touche «mode» pour confirmer le réglage, les prévisions météo se mettent à clignoter. Utilisez les touches «+»/«-» pour sélectionner la météo actuelle. ` Appuyez sur la touche «mode» pour confirmer le réglage et pour terminer les procédures de réglage, l’horloge retourne automatiquement en mode affichage normal de l'heure.
Appuyez sur la touche « CH » Appuyez sur « CH » Appuyez sur « CH » Appuyez sur « CH » Automatique Automatique Automatique Valeurs maximales/minimales ` Appuyez sur la touche «MEM» pour afficher la température/humidité maximale. L’écran LCD affiche la température/humidité minimale si vous appuyez à nouveau sur la touche «MEM» une fois les valeurs maximales sont affichées. ` «MAX» ou «MIN» sera affiché sur l’écran LCD.
Ensoleillé Partiellement nuageux Nuageux Pluvieux Fortes pluies Neigeux ` Les symboles indiquent les prévisions météo pour les 8 prochaines heures. Rétroéclairage ` En mode fonctionnement sur piles, appuyez sur la touche «Rétroéclairage/Rappel d’alarme» pour allumer l’écran pendant 8 secondes.
x x x x au milieu de hauts bâtiments à l'intérieur d'un bâtiment en béton à proximité d'un appareil électrique (ordinateur, téléviseur, etc.) et d'une structure métallique à l'intérieur d'un véhicule en déplacement Placez la station à un endroit adapté pour une bonne réception des signaux radio, en l'occurrence près d'une fenêtre et loin de toute surface métallique et de tout appareil électrique. Précautions x x x Installez l'appareil en intérieur. x x x x Ne plongez pas l'appareil dans l'eau.
Hinweis: Bedienungsanleitung in 8 Sprachen Zusätzlich zu dieser gedruckten Bedienungsanleitung können Sie die Bedienungsanleitung in 8 Sprachen auf der offiziellen Internetseite www.technoline.de herunterladen. Note: Instruction manual in 8 languages In addition to this printed user manual, you can download the user manual in 8 languages from the official website www.technoline.de .