User manual

Daily alarm set-up
 Press “MODE” to switch to “Alarm1” mode, “A1” and the alarm displayed
 Press and hold the key “MODE” for 3 seconds ,the flashing alarm time are shown
 The hour display of the alarm time is flashing. Use “UP “and “DOWN“ to select the hour.
Press “MODE” to confirm.
 Then follow the minutes. Use “UP “ and “DOWN “ to select the minutes,
 Press “MODE” to confirm.
 Then press “MODE” to switch to “Alarm2” mode, “A2” and the alarm displayed
 Press and hold the key “MODE” for 3 seconds ,the flashing alarm time are shown
 The hour display of the alarm time is flashing. Use “UP “and “DOWN” to select the hour.
Press “MODE” to confirm.
 Then follow the minutes. Use “UP “ and “DOWN “ to select the minutes,
 Press “MODE” to confirm.
Daily alarm on/off
 Press “MODE” to switch from time display to “Alarm 1” or “Alarm 2” mode
 When showing A1 or A2 alarm time, press “UP“or “DOWN” to activate the alarm with
alarm symbol showing.
 Press “UP’ or “DOWN” again to cancel the alarm
Information:
 The clock automatically changes from set-up mode to time mode if no keys are pressed
for 20 seconds.
 The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
To activate the snooze function, follow the steps below
 Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate the snooze function.
 If the snooze function is activated, alarm symbol is flashing.
 The alarm repeat after 5 minutes.
 The snooze function can be stopped by pressing any other key than “SNOOZE/LIGHT“..
Temperature alert set-up
 Press “MODE” to switch to “Temperature alert” mode