Operation Manual

27
3. With the desired country selected, press the SUN key to enter City setting mode.
4. The City code will start flashing. Use the + key or MIN/MAX key to select the City. Keep holding the
key allows the value to advance faster.
5. Confirm with the SUN key, or exit the setting mode by pressing the SET key or ALARM key without
saving the changes.
6. The city’s sunrise, sun duration and sunset time will be displayed in a few seconds.
7. Press the SUN key twice to go back to normal date display.
DISPLAY OF SUN DURATION TIME
1. In normal date mode, press the SUN key twice to display the sun duration time (total number of hours
of sunlight on the day).
2. Press the SUN key again will display the City selected. (See “LOCATION SETTNG FOR
SUNRISE/SUNSET TIME”)
3. Press the SUN key again to go back to normal date display.
ALARM SETTING
To set the daily alarm:
1. Press and hold ALARM key for 3 seconds until the alarm time shown.
2. The hour digit will be flashing. Press the + key or MIN/MAX key to adjust the hour.
3. Press ALARM key once and minute digit will be flashing. Press + key or MIN/MAX key to set the
minute, or exit the setting mode by pressing the SET key or SUN key.
4. Press ALARM key once more to return to normal display.
Note: To activate/deactivate the alarm function, press the ALARM key shortly. The display of the ((())) icon
represents that the alarm is "ON".
Sunrise
time
Sun duration
(hours : minutes)
Sunset
icon
Sunrise
icon
Sunset
time
City Code (flashing)
Alarm time
(flashing)
Alarm On indicator