Operation Manual

25
Weekday
Year (flashing)
Day. Month.
LCD CONTRAST SETTING
The LCD contrast can be set within 8 levels, from LCD 0 to LCD 7 (Default is LCD 3):
1. The digit starts flashing
2. Press the + key or MIN/MAX key to set the level of contrast desired.
3. Press the SET key to enter “Daylight Saving Time On/Off setting,” or exit the setting mode by
pressing the ALARM key or SUN key.
DAYLIGHT SAVING TIME ON/OFF SETTING
The daylight saving time (DST) function can be set ON/OFF. Default setting is “ON”:
1. “ON” will flash on the LCD with "dSt" displayed.
2. Use the + key to turn the daylight saving time function ON or OFF.
3. Press the SET key to enter “Manual Time setting” or exit the setting mode by pressing the ALARM
key or SUN key.
MANUAL TIME SETTING
To set the clock:
1. The hour digit will start flashing.
2. Use the + key to increase or MIN/MAX key to decrease the value. Keep holding the key allows the
value to advance faster.
3. Press the SET key to enter minute setting.
4. The minute will be flashing. Use the + key to increase or MIN/MAX key to decrease the value.
5. Press the SET key to enter “Calendar Setting” or exit the setting mode by pressing the ALARM key
or SUN key.
CALENDAR SETTING
Minutes
Hour (flashing)
Digit flashing
Flashing