WIRELESS 868 MHz WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this Weather Station with wireless 868 MHz transmission of outdoor temperature and display of indoor temperature, weather forecast icons and weather tendency indicators. It is further featuring a DCF-77 radio controlled clock and alarm function. With four easy to use function keys, this innovative product is ideal for use in the home or office.
FEATURES: The Weather station Hanging hole Battery compartment cover LCD Display Foldout stand Function keys 30
• • • • • • • • • • • • DCF-77 Radio controlled time function with manual time setting options DCF time reception ON/OFF 24 hour display Alarm function with snooze Temperature display in degree Celsius (°C) Indoor and outdor temperature with MIN/MAX records Manual reset of MIN/MAX records 3 weather forecast with weather tendency indicator Wireless transmission at 868 MHz Signal reception intervals at 4 seconds Low battery indicator Wall mounting or table standing (foldout stand) The Outdoor Temperature Tr
SETTING UP: Note: This weather station receives only one outdoor transmitter. 1. 2. 3. 4. 5. First, insert the batteries into the Temperature transmitter. (see “Install and replace batteries in the Temperature transmitter“). Immediately after and within 30 seconds, insert the batteries into Weather station (see “Install and replace batteries in the Weather station”). Once the batteries are in place, all segments of the LCD will light up briefly.
Note: Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not successful, then at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If the reception at 06:00 is still not successful, then the next try takes place at 02:00 next day. If reception is successful, the received time will override the manually set time.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please follow the steps below: 1. 2. 3. Remove the battery compartment cover at the back of the transmitter. Insert the batteries, observing the correct polarity (see marking). Replace the battery compartment cover on the unit.
FUNCTION KEYS: Weather station: The weather station has four easy to use function keys.
ALARM key • Enter the alarm setting mode • Switch the alarm ON/ OFF • Stop the alarm MIN/MAX RESET key • Press and hold to reset the MIN/MAX temperature records • Activate the snooze • Exit manual setting modes 36
LCD SCREEN AND SETTINGS: Radio controlled time reception icon Time Alarm icon Low battery indicator (weather station) MIN/MAX indoor temperature Indoor Temperature in °C Weather forecast icon Weather tendency indicator Outdoor Reception Signal icon* Low battery indicator (transmitter) MIN/MAX outdoor temperature Outdoor Temperature in °C 37
* When the outdoor signal is successfully received by the Weather Station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So user can easily see whether the last reception was successful (icon on) or not (icon off). For a better display clarity, the LCD screen is split into 4 sections.
Section 3 - WEATHER FORECAST AND WEATHER TENDENCY ICONS • Display of the weather to be expected in form of three weather symbols and two weather tendency indicators in form of an arrow, which change their appearance depending on the air pressure development Section 4 - OUTDOOR TEMPERATURE • Display the current outdoor temperature and outdoor MIN/MAX records • A signal reception symbol will be shown indicating that receiver is receiving outdoor temperature • Display of low battery indicator (transmitter) MA
TIME ZONE SETTING: Time zone (flashing) The time zone default is "0" hour. To set a different time zone: 1. The current time zone value starts flashing. 2. Use the + key to set the time zone. The range runs from 0, -1, -2…-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals. 3. Confirm with the SET key and enter the Time reception On/Off setting.
In area where reception of the radio-controlled time (DCF time) is not possible, the time reception function can be turned OFF. The clock will then work as a normal Quartz clock. (Default setting is ON). 1. The digit “ON” digit will start flashing on the LCD. 2. Use the + key to turn OFF the time reception function if necessary. 3. Confirm with the SET key and enter the Manual time setting.
To set the clock: 1. The hour digits start flashing in the time display section. 2. Use the + key to adjust the hours and then press SET key to go to the minute setting. 3. The minute will be flashing. Press the + key to just the minutes. 4. Confirm with the SET key and exit the setting mode. Note : The unit will still try to receive the signal despite a manual setting. When the signal is received, the manually set time will automatically be replaced by the received time.
3. 4. 5. Press ALARM button once and minute digit will be flashing. User shall then press + button to set the minute. Press ALARM button once to confirm the setting. To activate/ deactivate the alarm function, press the ALARM button once. The display of the alarm icon represents that the alarm is "ON". Note: The duration of alarm sounding is 85 seconds TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE ALARM: 1. 2. When the alarm is sounding, press the MIN/MAX RESET key to activate the snooze function.
Sunny Cloudy with sunny intervals Rainy For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather station to register.
Note : After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather Station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station has been designed for use in.
increasing and the weather is expected to improve, but when indicator points downwards, the air-pressure is dropping and the weather is expected to become worse. Taking this into account, you will see how the weather has changed and how it is expected to change. For example, if the indicator is pointing downwards together with cloud and sun icons, then the last noticeable change in the weather was when it was sunny (sun icon only).
Note: The MIN/MAX indoor temperature range is -9ºC to + 38ºC with 1°C resolution. OUTDOOR TEMPERATURE AND MIN/MAX RECORDS The outdoor temperature and outdoor MIN/MAX records are displayed on the last section of the LCD. Outdoor reception signal icon Outdoor icon MAX outdoor temperature record Outdoor Temperature MIN outdoor temperature record Note: The MIN/MAX outdoor temperature resolution is range -40ºC to + 60ºC with 1°C resolution.
LOW BATTERY INDICATOR Low battery indicator is displayed on the LCD when the batteries require changing. 868 MHz RECEPTION CHECK The Weather station should receive the temperature data within 3 minutes after set-up. If the temperature data is not received 3 minutes after setting up (not successfully continuously, the outdoor display shows “- -” ), please check the following points: 1. The distance of the Weather station or transmitter should be at least 1.
The transmission range is about 100 m from the transmitter to the Weather station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see Setting up). POSITIONING THE TEMPERATURE STATION: The Weather Station may be hung onto wall easily or free standing. To wall mount Choose a sheltered place. Avoid direct rain and sunshine.
Free standing With the foldout stand, the weather station can be placed onto any flat surface. POSITIONING THE TEMPERATURE TRANSMITTER: The Transmitter is supplied with a holder that may be attached to a wall with the two screws supplied. The Transmitter can also be position on a flat surface by securing the stand to the bottom to the Transmitter.
To wall mount 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature sensor onto the bracket. Note: Before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature reading is receivable. In event that the signal is not received, relocate the transmitters or move them slightly as this may help the signal reception.
• • • • • • When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings. Do not submerge the unit in water. Special care shall be taken when handling a damaged LCD display. The liquid crystals can be harmful to user's health. Do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified engineer. Opening and tampering with the unit may invalidate their guarantee.
Indoor temperature checking interval : every 16 seconds Outdoor data reception : every 4 seconds Power consumption: Weather station : 2 x AAA, IEC, LR3, 1,5V Temperature transmitter : 2 x AA, IEC, LR6, 1,5V Battery life cycle (Alkaline batteries recommended) : Approximately 12 months Dimensions (L x W x H) : Weather station : 84 x 22,6 x 149 mm Temperature transmitter : 38,2 x 21,2 x 128,3 mm LIABILITY DISCLAIMER: • • • • The electrical and electronic wastes contain hazardous substances.
• • • • • As stated on the gift box and labeled on the product, reading the “User manual” is highly recommended for the benefit of the user. This product must however not be thrown in general rubbish collection points. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of the temperature and other weather data.
