Operation Manual

setting is LCD 4):
1. Press the SET key until the digit starts flashing.
2. Use the OUT/+ key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the SET key and
enter in the Time Zone setting.
TIME ZONE SETTING:
Flashing
The time zone default of the Weather Station is “0”. To set a different time
zone:
1. The current time zone value starts flashing.
2. Use the OUT/+ key to set the time zone. The range runs from 0 to -
12 and then runs from +12 back to 0 in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception ON/OFF
setting.
21
TIME RECEPTION ON/OFF SETTING:
Digits flashing
In area where reception of the DCF time is not possible, the DCF time
reception function can be turn OFF. The clock will then work as a normal
Quartz clock. (Default setting is ON).
1. The digit “ON” will start flashing on the LCD.
2. Use the OUT/+ key to turn OFF the time reception function.
3. Confirm with the SET key and enter the 12/24-hour format setting.
Note:
If the Time Reception function is turn OFF manually, the clock will
not attempt any reception of the DCF time as long as the Time
Reception OFF function is activated.
The time reception icon and the “DCF” icon will not be displayed on
the LCD.
12/24-HOUR FORMAT SETTING:
Digits flashing
The time display can be selected to show hours in 12-hour or 24-hour
settings. (Default 24-Hour)
1. Use the OUT/+ key to toggle between “12H” or “24H”.
2. Confirm with the SET key and enter the Manual time setting.
MANUAL TIME SETTING:
In case the Weather Station cannot detect the DCF-signal (for example
due to disturbances, transmitting distance, etc.), the time can be manually
set. The clock will then work as a normal Quartz clock.