Operation Manual

ManualsBrandsTechno line ManualsAir ConditioningWS 7394

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an

example of innovative design and quality piece of engineering. Providing

radio controlled time, date, calendar, indoor and outdoor temperature,

indoor relative humidity, and air pressure history information. This unit will

never keep you guessing on current and future weather conditions.

Operation of this product is simple and straightforward. By reading this

operating manual, the user will receive a better understanding of the

Weather Station together with the optimum benefit of all its features.

FEATURES:

The Weather Station

Hanging hole

LCD Display

Battery

compartment

Function

keys

Stand

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

• Weekday and day calendar display (year and month only in setting

mode)

• Weather forecasting with weather tendency indicator

• Indoor comfort indicator

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and

time of reception

• Indoor humidity display as RH% with MIN/MAX records

•

Relative air pressure hPa/ inHg with adjustable reference value

Weather icon sensitivity setting

Relative air pressure history for the past 12 hours (electronic

barometer with barometric pressure trend)

• LCD contrast selectable

• Can receive up to 3 outdoor transmitters

• Low battery indicator

• Table standing or wall mounting

Summary of content (13 pages)

PAGE 1
WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, indoor and outdoor temperature, indoor relative humidity, and air pressure history information. This unit will never keep you guessing on current and future weather conditions. Operation of this product is simple and straightforward.
PAGE 2
The Outdoor Temperature Transmitter Battery cover • • • • Remote transmission of outdoor temperature to weather station by 433 MHz signal LCD showing current temperature Rain proof casing Wall mounting case TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please follow the steps below: 1.
PAGE 3
2. 3. 4. 5. 6. 7. displayed. If the indoor temperature and humidity are not displayed after 15 seconds, remove the batteries and wait for at least 1 minute before reinserting them. Once the indoor data is displayed proceed to step 2. Within 3 minutes of activating the Weather station, place the batteries into the transmitter (see “How to install and replace batteries in the Temperature transmitter“ above).
PAGE 4
which has a time deviation of less than one second in one million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-controlled Weather Station receives this signal and converts it to show the precise time in summer or wintertime. The quality of the reception depends greatly on the geographic location.
PAGE 5
LCD SCREEN: The LCD screen is split into 4 sections displaying the information for time/calendar, indoor temperature and humidity, weather forecast, air pressure and outdoor temperature.
PAGE 6
setting is LCD 4): 1. Press the SET key until the digit starts flashing. 2. Use the OUT/+ key to view all levels of contrast. 3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setting. TIME ZONE SETTING: Flashing The time zone default of the Weather Station is “0”. To set a different time zone: 1. The current time zone value starts flashing. 2. Use the OUT/+ key to set the time zone.
PAGE 7
Hour flashing 1. 2. 3. 4. 5. Minutes flashing The hour digit will start flashing. Use the OUT/+ key to set the hour. Press again the SET key to set the minutes. The minute digits start flashing. Use the OUT/+ key to set the minutes. Confirm with the SET key and enter the Calendar setting. Note: The unit will still try and receive the signal every hour despite it being manually set. When it does receive the signal, it will change the manually set time into the received time.
PAGE 8
hPa / inHg PRESSURE UNIT SETTING: The pressure display can be selected to show relative air pressure in hPa or inHg (default is “hPa”). Digit flashing 1. 2. Use the OUT/+ key to toggle between “hPa” or “inHg” unit Confirm with the SET key and enter the Relative air pressure value setting. Note: Units of weather icon sensitivity and air pressure history are not affected. They are always expressed in hPa. RELATIVE AIR PRESSURE VALUE SETTING The default relative pressure value is 1013 hPa (29.92 inHg).
PAGE 9
TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting, press the CH key or wait for automatic timeout. The mode will return to normal time display. INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data, the indoor comfort indicator are automatically updated and displayed on the second section of the LCD.
PAGE 10
does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy. Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast.
PAGE 11
has dropped and the weather is expected to get worse from the present time “0h“. Note: For accurate barometric pressure trends, the Weather Station should operate at the same altitude for example, it should not be moved from the ground to the second floor of the house. Should the unit be moved to a new location, discard readings for the next 12-24 hours.
PAGE 12
signal transmission or reception. Neighbors using electrical devices operating on the 433MHz-signal frequency can also cause interference. Note: When the 433MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Weather station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see “Setting up” above) otherwise transmission problems may occur.
PAGE 13
• • • • • and readings. When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings. Do not submerge the units in water. Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. Do not make any repair attempts to the units. Return it to their original point of purchase for repair by a qualified engineer.