Operation Manual

Once to show the minimum temperature and humidity values with time and date recorded
Twice to show the maximum temperature and humidity values with time and date recorded
Three times to return to the current time, date, temperature and humidity levels.
Note: the Time/date information is only available for the MIN/MAX temperature data.
2. To reset the minimum and maximum temperature and humidity data and the times at which they were
recorded, press the IN key continuously for about 3 seconds. This will reset all minimum and
maximum data recorded to the current time, date, temperature and humidity. The min/max
temperatures and humidity recorded are of current time and they remain unaffected by the time zone
setting.
OUTDOOR TEMPERATURE
Maximum Display
Outdoor Temperature
in °C or °F
Outdoor reception signal
Number showing the
transmitter unit (only if
there is more than one
transmitter)
The fifth LCD section shows the outdoor temperature and a reception signal. A number beside the
temperature will also show if more than one transmitter is used.
TOGGLING AND RESETTING THE OUTDOOR RECORDINGS:
1. To toggle between the outdoor current, minimum and maximum temperature data and the times at
which they were recorded, press the OUT key:
Once to show the minimum temperature value with time and date recorded
Twice to show the maximum temperature value with time and date recorded
Three times to return to the current time, date and temperature level
2. To toggle between transmitters, press the CH key:
40