Operation Manual

TIME RECEPTION ON/OFF SETTING

Flashing

In area where reception of the DCF-77 time is not possible, the DCF-77 time reception function can be

turned OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the IN key to turn OFF the time reception function.

3. Confirm with the SET key and enter the “12/24-Hour Display setting” or exit the setting mode by

pressing the CH key

Note:

If the Time Reception function is turned OFF manually, the clock will not attempt any reception of

the DCF time as long as the Time Reception OFF function is activated. The Time Reception icon will

not be displayed on the LCD.

12/24 HOUR TIME DISPLAY SETTING

Flashing

1. After setting time reception ON/OFF, press the SET key, “12h” or “24h” flashes in the LCD.

2. Press the IN key to select the “12h” or “24h” display mode.

3. Press the SET again to confirm and to enter the “Manual Time setting” or exit the setting mode by

pressing the CH key