User manual

6
temperature sensor might have to be closer than 30 meters if the weather statioin is not able to
receive signals. This may be due to obstructions and or interference. The user might need to
experiment with various locations to get the best reception.
4. If there is a change in power source in the main unit (i.e from batteries to AC-DC adatper or vice
versa), press ”TX” button (RTS 3) on the remote temperature sensors to reconfigure remote
temperature sensors. See figure 5.
CONFIGURING WEATHER STATION UNIT TO RECEIVE REMOTE TEMPERATURE SIGNALS :
1. Follow the above insructions to set up remote temperature sensor.
2. Press ”Channel” button (7) on weather station for 3 seconds. The symbol
will flash. This will
reset all temperature memories.
3. The weather station will begin scanning for signals for channel 1. As soon as signals are recevied
from channel 1, the temperature will be displayed. The weather station will automatically scan for
other channels. It will scan each channel for approximately 3 seconds before skipping to the next
chaneel.
4. Once all your channels are received by the unit, press ”Channel” button (7) once to confirm the
channel. The symbol
will no longer be displayed.
5. The weather station will receive a new signal automatically every 30 seconds to update the remote
temperature.
6. Press ”Channel” button (7) on weather station repeatedly to select between channel 1, channel 2,
and channel 3.
7. The symbol
will be displayed on the weather station unit if any of the remote temperature
sensor’s batteries need replacing.
TEMPERATURE MEMORY :
Press ”Max/Min” button (4) to display maximum recorded temperature, minimum recorded temperature
and current temperature. ”max” indicates maximum temperature. ”min” indicates minimum temperature.
TEMPERATURE DISPLAY :
1. The ”IN” temperature displays the indoor temperature. It is the temperature of the actual location
of the weather station.
2. The ”OUT” temperature displays the temperature of the remote temperature sensors.
3. Press ”Channel” button (7) on weather station repeatedly to display the temperature of channel 1,
channel 2, and channel 3.
CELSIUS/FAHRENHEIT :
PRESS ”+/C/F” button (4) to select between displaying the temperature in Celsius or Fahrenheit.
TEMPERATURE TREND :
1.
Indicates the temperature trend is increasing.
2.
Indicates there is a stable temperature trend.
3.
Indicates the temperature trend is decreasing.
SPECIFICATIONS
1. Indoor temperature range : -10’C ---- 70’C
2. Outdoor temperature range : -40’C ---- 70’C
3. Barometeric pressure range : 900mb --- 1050 mb.
4. Calendar range : year 2000 to year 2099