User manual

4
Follow the above instructions again to set synchronisation.
RCC ZONE OFFSET :
This clock is equipped with radio controlled time adjustment. The user will need to work out the time
zone signal they receive at their current location and make (any) adjustment as required. This function
also allows for daylight saving adjustment. Contact your local weather bureau or authorities for more
information.
1. Press”-/RCC” button (8) once for +1 time zone.
2. Press”-/RCC” button (8) once again for +2 time zone.
3. Press”-/RCC” button (8) once again for -1 time zone.
4. Press”-/RCC” button (8) once again for same time zone.
TO SET TIME MANUALLY :
1. Hold down the ”ALM SET” button (3) for approximately 3 seconds until the display is flashing.
2. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the hour setting.
3. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the
minute setting.
4. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the
year setting.
5. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to select
between the ”month/date” and ”date/month” setting.
6. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the
month setting.
7. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the
date setting.
8. Press ”ALM SET” button (3) again. Press ”+/C/F” button (4) or ”-/RCC” button (8) to select
between ”am/pm” and ”24- hour time” clock setting.
9. Press ”ALM SET” button (3) again to change language setting.
10. EN for English – GE for German – IT for Italian – FR for Frence – NE for Dutch – ES for Spanish –
DA for Danish.
11. Press ”ALM SET” button (3) again to confirm settings. Display will no longer flash.
TO SEE ALARM TIME :
1. Press ”MODE” button (6) once and alarm time 1 will be shown as indicated by A1.
2. Press ”MODE” button (6) again and alarm time 2 will be shown as indicated by A2
3. Press ”MODE” button (6) again and the current time will be shown.
TO SET ALARM TIME :
1. Press ”MODE” button (6) once and alarm time 1 will be shown as indicated by A1.
2. Press and hold ”ALM SET” button (3) for approximately 3 seconds until A1 flashes.
3. Press ”-/RCC” button (8) to change the hour setting.
4. Press ”ALM SET” button (3) again.
5. Press ”+/C/F” button (4) or ”-/RCC” button (8) to change the minute setting.
6. Press ”ALM SET” button (3) again.
7. When Alarm time 1 (A1) is shown, press ”ALM SET” button (3) to turn ON and OFF the alarm.
The symbol .
will be shown when the alarm is on.
8. Press ”Mode” button (6) again and alarm time 2 will be shown. To set alarm time A2, follow the
above instructions. Press ”Mode” button (6) again to see current time.
9. The symbol .
will be shown when alarm A2 is on.
10. The alarm will sound for 120 seconds when the preset alarm time is reached. Press any button at
the back of the clock to de-activate the alarm. The clock will automatically enter snooze mode if
the alarm is not de-activated.