Operation Manual

Time section
Weather
Tendency
section
Date section
Touch screen "switching area" on LCD: Touch screen "switching area" on LCD:
Pressure History
section
Alarm history selection
Pressure section
Indoor humidity
section
Outdoor humidity
section
Backlight section
key
Buzzer selection key
Text Display
(Set up Display)
Outdoor temperature
section
Indoor
Temperature
section
3 Putting into Operation
At first it is to decide whether battery supply or mains supply (AC/DC
mains adapter included) will be used to operate the system. Both
methods allow the connection of Thermo-Hygro Sensor and Base
Station by cable or by 433 MHz radio signal.
3 Putting into Operation
At first it is to decide whether battery supply or mains supply (AC/DC
mains adapter included) will be used to operate the system. Both
methods allow the connection of Thermo-Hygro Sensor and Base
Station by cable or by 433 MHz radio signal.
Note: Note: When putting the Weather Station into operation it is important
to tentatively perform in close proximity (e.g. on a table) a complete
wiring and set up of the system in the configuration of its prospective
use. This measure serves to test all components for correct function
before placing and mounting them at their final destinations.
32