Operation Manual

17. Accessories: adding cable extensions

For your convenience, additional telephone cables to increase

the connection distance between each of the units may be

purchased from any reputable hardware store. Simply add

these to the current cables to extend your cable connection

distance.

When securing the cables during mounting, ensure that base

station can receive the weather data since increasing the

cables lengths may also increase levels of interference and

result with reception difficulties. Interference levels will greatly

depend on the surrounding area for example setting up on or

near metal piping may considerably reduce reception.

For best results, do not to add more than 10 meters of exten-

sion cable from item to item onto the existing cable lengths as

this may reduce reception levels. Again, reception and inter-

ference levels will greatly depend on the surrounding envi-

ronment at your point of mounting.

Note:

It is important to keep all the connected extension heads away

from rain, moisture and other extreme weather conditions as

exposure can cause short circuits and damage to this item.

18. Changing batteries:

Telephone Extension Cables

Battery change only in the thermo-hygro-sensor:

1. Open the battery cover

2. Remove the old batteries and insert with new ones of the

recommended type and replace the cover