Operation Manual

Continue to press the SET key to toggle through the setting

mode until the LCD returns to the normal display mode or

press the MIN/MAX key at any time to exit.

Note!

Keeping the PLUS(+) or MINUS(-) key depressed when set-

ting certain units in the manual setting mode will in-

crease/decrease digits in greater steps.

Manual time setting

The base station will continue to scan for the radio controlled

time signal from 2am-6 am each day (winter time) or from

3am-6am (summer time) despite it being manually set. During

reception attempts the DCF tower icon will flash.

• If reception has been unsuccessful, then the DCF77

tower icon will not appear but reception will still be at-

tempted the following hour within the time frame

• If reception has been successful, the received time and

date will overwrite the manually set time and date and no

further reception is attempted until the following day

14. MIN/MAX Programming Modes

MIN/MAX display Mode

The MIN/MAX Mode provides the user with information about

the MIN/MAX values of all weather data together with the time

and date at which these values were recorded.

Entering each MIN/MAX mode

In the normal display mode for e.g. the indoor temperature

and humidity, press MIN/MAX key to toggle the display be-

tween the maximum, minimum and current records. While the

maximum or minimum values are shown press the DISPLAY

key once to show the time and date that value was received.

Now press the MIN/MAX key to toggle from the minimum and

maximum readings and the time and dates the records were

received are also shown. Still in the MIN/MAX mode (where

the time and date for a value are shown), press the DISPLAY

key to move through each respective unit as follows:

• Indoor temperature (max or min with time and date)

• Indoor humidity (max or min with time and date)