Operation Manual

Mounting the Wind Sensor onto a mast

Firstly, check that the wind-fan and the wind-vane can rotate

freely before fixing the unit. For correct and accurate readings

it is important to mount the sensor so that the front (marked E)

is pointing in East-West direction. The wind sensor should

now be mounted using the screw provided onto a mast to

allow the wind to travel around the sensor unhindered from all

directions (ideal mast size should be from Ø16mm – Ø33mm).

Once the wind sensor is fixed onto the mast, connect the

cable to the corresponding thermo-hygro sensor socket so

that operating power supply can be received and data can be

transmitted to the base station.

Mounting the Rain Sensor

Wind-fan

Wind-vane

Mast

Base portion

Funnel portion

For best results, the rain sensor should be securely mounted

onto a horizontal surface about 1 meter above the ground and

in an open area away from trees or other coverings where

rainfall may be reduced causing inaccurate readings.