Operation Manual

base station to the sensors otherwise no weather data will be
received.
Some weather readings such as wind speed and direction
may not appear immediately on the LCD if the wind-fan or
vane of the wind sensor is moved. This is due to the set
reading time intervals for the wind readings. However the
current wind speed or direction will be displayed once the time
reading interval is reached. For rainfall, the interval readings
may take up to 2 minutes before the data is displayed on the
LCD.
9. Mounting
Important Note
Prior to drilling mounting holes and permanently affixing any of
the units, please ensure the following points are considered:
• Cable lengths of the units meet with your distance re-
quirements at the point of fixing
• Signals from the sensors can be received by the base
station at points of mounting
• Radio controlled time signal can be received at the point
of mounting
Base Station
With two foldable legs at the back of the unit, the base station
can be placed onto any flat surface or wall mounted at the
desired location by the hanging holes also at the back of the
unit. It is important to check that the 433MHz (if using wireless
connection) and the DCF77 radio controlled time signal can
be received before permanently mounting any of the units.
Should the base station not display the 433MHz weather data
from the sensors or the radio controlled time from the desired
location, then relocate the units. Once the signals are re-
ceived, the system can be affixed. Also if you have selected to
use cable connection, ensure that distances can reach all
desired locations before affixing any unit permanently
63