Operation Manual

ManualsBrandsTechno line ManualsAir ConditioningWM 5300

KSPO:

NIL DV229NL & TS21 MANUAL (ENG)

SIZE: W105 X H148 (mm)

BY Lai HZ 21/12/12

Remote Thermo-Hygrometer

Main Unit

Meteotime Weather Station

with

Wireless Thermo-Hygrometer

DAY/NIGHT

MEM

CHANNEL

SET

TEST

In/Outdoor Temperature/

Humidity.

Information Window.

Today Weather Information

including Wind Speed, Wind

Direction, and the probability

of Rain/Snow/Hail, Day &

Night Temperature, Day &

Night Weather Status.

Tomorrow, One-Day-After,

and Two-Day-After Weather

Information including Day &

Night Temperature, Day &

Night Weather Status.

WM5300

three days for 470 cities

• 3 channel outdoor 433Mhz wireless Thermo-hygrometer (channel 1 sensor is included,

additional sensors are required for channels 2 and 3)

• Indoor Thermo-hygrometer

• Maximum and minimum memories of temperature and humidity readings

• Temperature and humidity trends (UP/ FLAT/ DOWN),

• Temperature unit in degree C only.

• Regional Day-time temperature and Night-time Temperature information

• 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch /Swedish/ Deutsch)

• Critical Weather Alert

• Maximum of 5 cities’ weather information can be selected and displayed

• Personalized a place name / city.

• Radio-controlled Clock and Calendar (24 hours format only)

• Time-zone setting

• Dual alarm (weekday alarm/single alarm, Alarm sound for 2 minutes)

• Pre- alarm (Programmable) for outdoor sensor – Channel 1 only.

• Battery Low Indicator for Main Unit and Wireless Sensor

• Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor

Alarm Time

DATE

Weekday alarm “OFF W-ALM”

Single alarm “OFF S-ALM” Pre-alarm “OFF P-ALM”

Exit to city display mode

• Read critical weather information one by one.

• Turn ON the alarm

• Press and hold for 3 seconds to enforce a radio controlled clock DCF signal search

• Switch to next day’s weather information

• Turn OFF the alarm

• Press and hold for 3 seconds to enforce a wireless RF signal search from remote sensor

• Switch to read outdoor temperature and humidity readings of channels 1, 2 and 3

• Press and hold for 3 seconds to enter into the auto-circulation display mode

• SCAN A: the signal strength will be represented from 0 (very bad) to 9 (very good).

• You are able to press [SET] to switch from the display of the City to date, weekday alarm,

single alarm and pre-alarm.

DATE

ALARM

temperature and humidity readings in record

Summary of content (3 pages)

PAGE 1
Meteotime Weather Station with Wireless Thermo-Hygrometer WM5300 KSPO: NIL DV229NL & TS21 MANUAL (ENG) SIZE: W105 X H148 (mm) BY Lai HZ 21/12/12 Alarm Time Today Weather Information including Wind Speed, Wind Direction, and the probability of Rain/Snow/Hail, Day & Night Temperature, Day & Night Weather Status.
PAGE 2
SWITCH TO NEXT DAY’S WEATHER INFORMATION For each press of the UP [▲] button, the user can switch and view the weather information from today to tomorrow, one-day-after and two-day-after. [DAY/NIGHT] Today’s weather information: UP [▲] DAY/NIGHT Tomorrow’s weather information: UP [▲] UP [▲] One-day-after’s weather information: UP [▲] Two-day-after’s weather information: [DAY/NIGHT] flashing WEATHER flashing WEATHER WEATHER DATE SINGLE ALARM WEEKDAY ALARM PRE-ALARM.
PAGE 3
ALARM FEATURE Weekday Alarm: - This is a repeat alarm that will activate daily from Monday to Friday at a set time. Single Alarm: - This is a single alarm that will activate once at a set time HOW TO SET ALARM - Press [SET] to toggle between weekday, single alarm time or pre-alarm. If the alarm is disarmed, the time will be displayed as “OFF W-ALM” - Hold [SET] for 3 seconds, the hour digits will blink. - Enter the hour by using UP [▲] or DOWN [▼] button.