Operation Manual

Press “
▲ CHANNEL”
button (3) or “
▼/°C/°F / RCC”
button (4) to change the AM/PM or
12-hour clock setting.
Press “MODE” button (1) again. Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC”
button (4) to change the TIME ZONE setting.
Press “MODE” button (1) again. Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC”
button (4) to change the hour setting.
Press “MODE” button (1) again. Press “
▲ CHANNEL”
button (3) or “
▼/°C/°F / RCC”
button (4) to change the minute setting.
Press “MODE” button (1) again to confirm settings. Display will no longer flash.
To set calendar:
Press the “MODE” button (1) until the calendar is displayed.
Hold down the “MODE” button (1) for approximately 3 seconds until the display is
flashing.
Press “MODE” button (1) again. Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC”
button (4) to change the year setting.
Press “MODE” button (1) again. Press “
▲ CHANNEL”
button (3) or “
▼/°C/°F / RCC”
button (4) to change between the date/month and month/date setting.
Press “MODE” button (1) again. Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC”
button (4) to change the month setting.
Press “MODE” button (1) again. Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC”
button (4) to change the date setting.
Press “MODE” button (1) again to confirm settings. Display will no longer flash.
To set alarm time:
Press the “MODE” button (1) until the alarm is displayed. “AL” will be shown.
Hold down the “MODE” button (1) for approximately 3 seconds until the display is
flashing.
Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC” button (4) to change the hour
setting.
Press “MODE” button (1) again.
Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC” button (4) to change the minute
setting.
Press “MODE” button (1) again.
Press “▲ CHANNEL” button (3) or “▼/°C/°F / RCC” button (4) to change the duration of
the snooze time (from 1 minute to 20 minutes).
Press “MODE” button (1) again to complete.
When Alarm time is shown, press “
▲ CHANNEL”
button (3) to turn on and off the alarm.
will be shown when the alarm is on.
The alarm will sound for 120 seconds when the preset alarm time is reached. Hit any
button on the back of the clock to deactivate the alarm.
Hit the “SNOOZE / LIGHT” button (5) when the alarm is on to enter snooze mode.
will flash when the clock is it snooze mode. The alarm will sound again after the
preset snooze time has been reached. Hit any button on the back of the clock to
deactivate the alarm.
REMOTE TEMPERATURE SENSOR