Operation Manual

32
FUNCTION KEYS: THE REMOTE COST CONTROL RECEIVER The Remote Cost Control Receiver has six easy to use function keys for operation. DISPLAY key Press DISPLAY key to change the display mode: • Instantaneous power in Watt (LCD displays “W”) with total cost monitoring (LCD displays “TOTAL
COST”).
• Maximum load power in Watt (LCD displays “MAX W”) with cost per month forecasting (LCD displays
“COST/MONTH”).
• Energy consumption in Watt hour or kilo Watt hour (LCD displays “Wh” (Figure 5) or “kWh” (Figure 6)
which depends on the value, when the value is smaller than 2000Wh, it shows in Wh; when the value is at 2000 or higher, it shows in kWh.) with cost per year forecasting (LCD displays “COST/YEAR”).
• The total electrical appliance (e.g. television) operating time in hour (LCD displays “ON”…”h”) with total
power monitor turn on time in hour (LCD displays “TOTAL”…”h”) (Figure 7).
Figure 5
Energy
consumption in Wh
Figure 6
Energy consumpti
on
in kWh