Operation Manual

FEATURES:

• It is powered by the AC line (230V 50Hz).

• Each power monitor has its unique ID.

• Measure the power consumption of the electrical appliance, which is plugged into the power monitor and

then transmits information to the receiver at 868 MHz.

• Transmits data every 5 seconds.

COST MONITORING:

Using this feature, users will see the cost of electricity running in their electrical appliances. For cost monitoring,

the value is shown on the LCD as “TOTAL COST” and the information obtained will enable users to be more

power consumption aware and efficient.

Note: Press the Display button until TOTAL COST is shown in the lower display part.

COST FORECASTING:

Cost forecasting is useful for budgeting future electricity bills as the approximate cost to run an electrical

appliance over a period of time can be estimated in this way. There are two cost forecasting displays screens

as follows:

1) COST/MONTH = cost per month forecast (assuming normal usage)

2) COST/YEAR = cost per year forecast (assuming normal usage)

Note: Press the DISPLAY button until COST/MONTH or COST/YEAR is shown in the lower display part.