Operation Manual

36
LRN/SCAN key • Press LRN/SCAN key about 2 seconds to start the 6 seconds learning reception to detect new power
monitor(s). The “LRN” sign and “SCAn” will be displayed during the process. (Figure 14) Press once more to confirm and store the detected channel.
• Press LRN/SCAN key once to collect and update the instantaneous data of the already connected power
monitor(s), only “SCAn” will be displayed during the process.
TARIFF key The tariff should be input before the operations of cost forecasting, monitoring and cost saving calculation. Press the TARIFF key once to show the current tariff. To set up the tariff, follow the below steps: 1. Press and hold the TARIFF key for 2 seconds to enter the setting mode of tariff, the most significant digit
is blinking. (Figure 15)
Figure 14
The learn mode
Figure 15
Blinking