INSTRUCTION MANUAL WT 498S Radio Controlled Alarm Clock with Temperature and Calendar EN 1
INSTALLATION For best reception of radio controlled signal, keep your clock close to a window and away from metal surfaces, electrical appliances and magnetic fields. Keep your clock at least 3 feet away from the AC outlet or the AC/DC adaptor. Plug the AC/DC adaptor to an AC household outlet, then plug the DC jack to the back of the clock. Your clock is ready to work for you. BATTERY BACK-UP INSTALLATION 1. Slide open the battery cover at the back of your unit. 2.
4. Then press SET once again, time digits change to “24 Hr” and flash, press or to select “12 Hr” time format. PM will appear on the display to indicate afternoon time. There is no AM indicator. 5. Then press SET once again, time digits change to year “2014” and flash. Press to set the year. 6. Then press SET once again, month digits flash. Press 7. Then press SET once again, date digits flash. Press or button to set month. or 8. Then press SET once again, the 1D 1M flash. Press Date-Month display.
. Press SET once again or if no key pressed for approx. 10 seconds to exit the Alarm 2’s setting mode. TO TURN ON OR OFF ALARM 1 AND 2 1. At normal time display, press AL 1.2 / ON· ·OFF once to activate Alarm 1, appears. 2. Press once again to activate Alarm 2. appears. 3. Press again to activate both Alarm 1 and 2. Both and appear. and disappear). 4.
Alarm Duration Snooze Duration 2 minutes 5 minutes Environmental reception effects The clock obtains the accurate time with wireless technology. Same as all wireless devices, the reception is maybe affected by the following circumstances: • long transmitting distance • nearby mountains and valleys • near freeway, railway, airports, high voltage cable etc.
