Full Product Manual

product around obstacles. To enable geocell to be expanded and installed with ease, it is often necessary to secure
the product along one side of the slope, using a suitable fixing method. Please use fixing pins during installation
(see the picture below) or U shape pins. Once the product has been fixed on one side, it can then be expanded,
along the length of the slope, until the desired cell shapes and sizes are achieved. If the geocell panel is too long, it
can be cut to size using a pair of scissors. However, if more than one panel of geocell is to be installed on the same
surface the panels can be joined together by stapling and further pinning.
(d) Infilling of Cell
After the geocell has been fixed and anchored in place, in-filling of the cells may be carried out. For general
convenience, it may be advisable to commence filling from the toe (bottom) of the slope. The in-filled cells, at the
lower part of the slope, will provide a platform for in-filling the upper cells. If required, the in-fill can be compacted
into place using an appropriate method, which should not damage the fabric of the geocell, It is very important to
ensure that the geocell is completely covered, after in-filling. Prolonged exposure to sunlight will directly affect the
product's longevity.
TECHNO EARTH
E-Mail Us : [e-mail]
Website : www.technoearthpavers.com
Phone : [phone]