User's Manual

2-5
2. After setup finishes unpacking the software, a dialog box will pop up with the
option to continue (by clicking on the Next> button see Figure 2.1.4), exit the
setup, or at this time you may choose an alternate location for the installation. If
you have no objections to the default location just click on the Next> button to
continue the installation.
3. The TDP installation will ask what START menu Program Group you want the TDP
software shortcut installed. Click FINISH if the default Program Group name is
adequate.
The Data Programming Software is now installed and ready to use with an 8.33
kHz AM series Transceiver.