User's Manual

1-1
SECTION 1
GENERAL DESCRIPTION
1.1 INTRODUCTION
This publication provides operating and installation information on the TiL TDP-90
Programming Software for 8.33 kHz AM series transceivers. The TDP software allows a
standard PC to retrieve data from a connected 8.33kHz AM series transceiver, for editing,
storing, and sharing with other 8.33 kHz AM series transceivers. With the TDP software,
you can create, save and print archives of your 8.33 kHz AM series transceiver channel
settings.
1.2 DESCRIPTION
The TiL TDP-90 software is a 32 bit Windows application that will work under Windows
95, Windows 98 and Windows NT 4.0. There are no known issues preventing the TDP-90
from working under Windows 2000. Please see section 2 for details on your particular
installation.
1.3 MINIMUM SYSTEM REQUIREMENTS
Windows 95
• Intel 486 or compatible based PC
• Windows 95 with the latest Service Releases/Packs installed
(Installation of Microsoft Internet Explorer 5.0 or any Microsoft application more
recent than mid 1998, will have automatically updated the required system files.)
• Mouse
• 5 MB free Hard-Disk space
• One available properly configured RS-232 serial (COM) port
or Windows 98 / Windows 2000
• Intel or compatible Pentium class PC
• Windows 98 or Windows 2000 with the latest Service Releases/Packs installed
• Mouse
• 5 MB free Hard-Disk space
• One available properly configured RS-232 serial (COM) port
or Windows NT 4.0
• Intel or compatible Pentium class PC
• Windows NT 4.0 with at least Service Pack 4 installed
(Installation of Microsoft Internet Explorer 5.0 or any Microsoft application more
recent than mid 1998, will have automatically updated the required system files.)
• Mouse
• 5 MB free Hard-Disk space
• One available properly configured RS-232 serial (COM) port