User's Manual

2-7
2.3.4 Programming a Frequency
Having ascertained the desired operating frequency, continue as follows:
(1) Run the TDP-90 program on the computer.
(2) Click on the Data pull-down list and select the serial port to which the transceiver is
connected.
(3) Set the program for 1 channel.
(4) Turn on power to the transceiver.
(5) Click on the Up icon to retrieve the frequencies from the radio. You will see activity
in the Terminal window as data is being transferred.
(6) Edit the frequencies as desired.
(7) Click on the Dn icon to copy the frequency to the transceiver. You will see activity
in the Terminal window as data is being transferred.
(8) Click on the diskette icon to save the file.
(9) Click on the printer icon to print a hard-copy of the frequency.
(10) Turn off power to the transceiver.