User's Manual

2-10
4. Follow the menus to edit channels, print channel list, up or download as desired.
5. The data file is continuously updated as each change is made, so you don’t have to save
the file at any time. To have multiple data files, you will have to copy the data file to
another name and then copy it back when needed. There always has to be a data file
called “DATA" or the program will not work.
2.14.10 Helpful Hints:
* Be sure to never plug in the radio while the power supply is on or damage may occur to
your printer port.
C You can only use LPT1 as the printer port. Make sure it is enabled in the BIOS.
C The program works best on older, slower computers but has worked on some new PCs
running DOS. A good way to try this out is to make a DOS bootable floppy with the
software on it running the software from the A: drive.