User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-3 Installation & Operating Instructions TiL 11RE436
2-4
TDFM-7300-3 Transceiver Recommended Keypad Menu Defaults:
TDFM-7300-3
Series
Transceiver
Portable
Conventional
Operation
SmartNet / SmartZone
Operation
ITEM ITEM
F1 Key
Upper Side
Button 1
Monitor Unprogrammed
F2 Key
Middle Side
Button 2
Nuisance Delete Unprogrammed
F3 Key
Bottom Side
Button 3
Talkaround/
Direct
Unprogrammed
F4 Key Top Button Volume Set Tone Volume Set Tone
MUP and
MDN keys
16-Position
Rotary Knob
Channel Select Talkgroup Select
ESW Key
Two-Position
Concentric or
Ergo Switch
Unprogrammed A (
∅
)
Unprogrammed B (O)
Unprogrammed A (
∅
)
Unprogrammed B (O)
TSW Key
Three-Position
Toggle Switch
Blank (A)
PL Disable (B)
Scan (C)
Blank (A)
PL Disable (B)
Scan (C)
NOTE:
It is possible to use Motorola’s Customer Programming Software (CPS™) to alter the
default keypad settings of the TDFM-7300-3 radio. However if custom key settings are
chosen it will not be possible for Technisonic to help the Pilot or other Radio User through
operational difficulties. These questions will have to be referred to the Radio System
Administrator responsible for customising the settings. Technisonic recommends that the
default key settings stay in place until all airframe installation and operational issues have
been overcome.