User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-2 Installation & Operating Instructions TiL 10RE430A
1-6
ANALOG MODULE SPECIFICATIONS
GENERAL
Frequency Ranges:
UHF FM analog
403 -512 MHz
Operating Mode: F3E simplex or semi-duplex (FM modules)
Channel Spacing: 25 or 12.5 kHz
FM Frequency Selection:
via front panel
200 memories per band programmed with:
a) Tx Frequency/Rx Frequency
b) Tx/Rx CTCSS tone or DPL code
c) 9-character alphanumeric title
CTCSS squelch/encoder: *All CTCSS tones available
DPL digital squelch/encoder: *All standard DPL codes
DTMF encoder: *All standard DTMF tones
* Available only on FM Modules.
UHF FM RECEIVER
Sensitivity at 12 dB SINAD Better than 0.35 µV
Adjacent Channel Selectivity -70 dB (25 kHz)
-60 dB (12.5 kHz)
Spurious Attenuation -80 dB
Third Order Intermodulation -70 dB
Image Attenuation -60 dB
FM Acceptance ± 6 kHz
Hum and Noise Better than 40 dB
Audio Distortion less than 5%
Antenna Conducted Emission less than -70 dBm