User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Installation Instructions Page 2-7
TiL 09RE404 Rev C Issue 1
J2: Boot Program Enable - factory set DO NOT INSTALL
J4: Option Jumpers:
1-2 Maintenance Mode Enable - DO NOT INSTALL IN AIRFRAME, BENCH ONLY
2-4 Factory Use Only – DO NOT INSTALL
5-6 n/u reserved
R8: Main Rx Audio adjust - factory set
R10: Tx Mic Audio Level Adjust – factory set
R11: Guard Rx Audio adjust – factory set
R17: RF Low power adjust – factory set
R18: RF High power adjust – factory set
R56: DTMF Level Adjust – factory set
FIGURE 2-4 Control points for the TDFM-136A MCU Board