User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-27
TiL 09RE405
Note that the cursor will automatically jump to the next valid column, the cursor will wrap. The ‘g’
indicates a separate Guard option; for the commands that support this, the Main and Guard can
be enabled / disabled separately. In addition, some of the commands are either channel agnostic,
or specific to the Main channel only and can thus be invoked for Main even when the radio front
panel switches are in the Guard position.
For example, with the switches in the Guard position, the user can still scroll through the
Main memories using the
and keys. These types of commands are
available in the Guard mode, but the permissions are determined by the Main permission. The
table below indicates all the available user commands, and shows the permission mode as
follows:
• Shows a command that has a distinct permission.
• Shows a command that is available in Guard, but permission is controlled by Main.
X Shows a command that is NOT available for the channel.
TABLE 2-7 Permission Applicability with respect to Command Levels
Level 1 Level 2 Level 3 Cmd
Num
Command M G Command M G Command
M G
1 Select MN Memory
••
Create/Prog All
••
Set Main Boot Memory
• •
2 Brighter
• •
Copy GD to Main
• •
Upload to PC
• •
3 Edit Op Mode
••
Lock Keypad
• •
Set Hex/Decimal
• •
4 Scroll MN Memory Down
• •
Not Used
•X
Show Version
• •
5 Scan
•X
Edit Scan List
•X
Edit Scan Params
• •
6 Scroll MN Memory Up
• •
Edit Text
••
Set PTT Timer
• •
7 Edit Frequency
••
Create Shadow
•X
Set Sidetone Level
• •
8 Dimmer
• •
Copy Main to GD
• •
Download from PC
• •
9 Edit Squelch
••
Edit Unit ID
••
Show Squelch
••
L4-4 Unused
L4-5 Unused
L4-6 Unused
L4-7 Unused
L4-8 Unused