User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-23
TiL 09RE405
L3-9 Display Channel Squelch Parameters
Display the Squelch parameters for the channel. The data are displayed as follows:
R x : T o n e C o d e T a l k G N A C
A 1 6 7 . 0 2 3 $ 0 0 0 1 $ 2 9 3
FIGURE 2-30 User Screen to Display the Receive Squelch Parameter Values
When displaying the receive parameters, the noise squelch level appears beneath the “Rx” that
starts the line, this space is blank in the transmit parameters display:
T x : T o n e C o d e T a l k G N A C
1 6 7 . 0 2 3 $ 0 0 0 1 $ 2 9 3
FIGURE 2-31 User Screen to Display the Transmit Squelch Parameter Values
The user can switch between displaying receive and transmit parameters as follows:
toggle the squelch parameter display Rx/Tx
exit the command
L3-0 Command Level Up
This key selects the next HIGHER Command Level, the Command Level is indicated by a
subscript digit in the 4th character position on the lower row of the display (see section 2.1
above).
L3-* Command Level Down
This key selects the next LOWER Command Level, the command Level is indicated by a
subscript digit in the 4th character position on the lower row of the display (see section 2.1
above).
L3-# Unused