User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-22
TiL 09RE405
L3-7 Sidetone Audio Level Adjust
This command allows the user to adjust the level of side tone. The screen shows the currently
selected level as shown:
3 - 7 S i d e t o n e A u d i o
A u d i o L e v e l :
FIGURE 2-28 User Screen to Set the Sidetone Audio Level
The user may edit the side tone audio level as a decimal number from 0 to 16 as follows:
to
to decimal mode: enter number, cursor automatically advances
advance to next screen
abandon the entry and exit
Default Level: 10
L3-8 PC Data Upload/Download
This command allows a user to exchange TDFM-136A channel memory files (records) between a
PC and the transceiver. The unit must be connected to a PC running Windows 95, 98 or NT 4.0
and the TiL TDP-136 Radio Communications Software package. To exchange record data the
Transceiver must be in this mode, then the communication is controlled by the PC software. The
transceiver will wait for 25 seconds to receive a valid record before timing out. The radio will
indicate which memory is being transferred, and when the transfer is complete.
C o m m u n i c a t i o n w i t h P C
R e a d y
FIGURE 2-29 User Screen to Upload/Download Memory Data to the PC
The transceiver may have to swap memory space during the download, if this happens the
activity will be displayed on the front panel and the download will be completed after a SWAP and
ERASE cycle is finished.
There is one user key function:
abandon PC communications mode