User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-17
TiL 09RE405
L2-9 Edit Unit ID Value (MN/GD)
The Unit ID is a number from 0 to 9,999,999 that is given to the RF module, this number should
be unique within the operating group of radios, but this is NOT a universally mandated number
(e.g. the number is NOT assigned by any P25 umbrella group, or even by the manufacturer), the
user may edit this number as desired.
This command allows the user to Edit the Unit ID, note that the system has two (2) unit ID's one
for the Main, and one for the Guard. The value is editable in decimal only.
to decimal mode: enter number, cursor automatically advances
accept the entry and return
abandon the entry and exit
L2-0 Command Level Up
This key selects the next HIGHER Command Level, the Command Level is indicated by a
subscript digit in the 4th character position on the lower row of the display (see Section 2.1
above).
L2-* Command Level Down)
This key selects the next LOWER Command Level, the command Level is indicated by a
subscript digit in the 4th character position on the lower row of the display (see Section 2.1
above).
L2-# Not Used)