User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-15
TiL 09RE405
The keys for the text editor operate as follows:
step through available edit groups (A-Z, a-z, 0-9, +extra characters – see table 2-6)
scroll up/down through available characters
move cursor forward / backward
accept the entry and return
abandon the entry and exit
Note that the up/down arrow keys are scroll enabled, that is, if you hold them you will scroll
through the character set rather than having to press each time you want to advance.
Table 2-5 Extra Characters for Text Edit
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
! “
#
$ % & ‘ ( ) * + , - . /
Note that the first character in the table is a blank space.
L2-7 Create Shadow Channel
This command allows the user to create a shadow channel, the steps are the same as for
creating a regular channel, except that the user must pick a primary channel on which to base the
shadow channel first, and some parameters are not valid for shadow channels so the user is not
given the opportunity to enter or edit these.
L2-7.1 Selecting a Primary Number to Base the Shadow On
Upon selecting the Create Shadow Channel command the user is prompted to enter the primary
channel upon which the shadow channel is based, the screen displays the current memory
number as a default:
0 0 6 P r i m a r y C h a n n e l
E n t e r N u m b e r ( 0 - 9 , # * )
FIGURE 2-17 User Screen to Enter a Primary Memory for the Shadow Channel
Now, you must select an already existing channel from within the 001 to 230 limits as follows:
to decimal mode: enter number, cursor automatically advances
accept the entry and return
abandon the entry and exit
Assume that the user entered a primary of '006'.