User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-10
TiL 09RE405
L1-9.4 Edit Project 25 Talkgroup Value
Scope: digital only, receive and transmit, range 0-65535 ($0000-$FFFF)
If the P25 TalkGroup was chosen the, the prompt line will display the current TalkGroup
value, the cursor will be on the first digit:
0 0 1 M a i n D 1 3 6 . 0 0 0 0 R g
P 2 5 T a l k G r o u p : 0 0 0 1
FIGURE 2-11 User Screen to Edit the P25 TalkGroup Value
This parameter may be edited in either HEX or in Decimal (see command L3-3). The edit keys
are as follows:
hex edit: step up/down through hex digits (0-9, A-F)
hex edit: move cursor forward / backward
to decimal mode: enter number, cursor automatically advances
accept the entry and return
abandon the entry and exit
Note: If P25 Talkgroup was chosen, the editor will drop into Edit NAC upon accepting the
Talkgroup value.
L1-9.5 Edit Project 25 NAC Value
Scope: digital only, receive and transmit, range 0-4095 ($000-$FFF)
If the P25 NAC was chosen (or after entering the P25 TalkGroup) the prompt line will
display the current NAC value, with the cursor on the first digit:
0 0 1 M a i n D 1 3 6 . 0 0 0 0 R n
P 2 5 N A C : 0 0 1
FIGURE 2-12 User Screen to Edit the P25 NAC Value
This parameter may be edited in either HEX or in Decimal (see command L3-3). The edit keys
are as follows:
hex edit: step up/down through hex digits (0-9, A-F)
hex edit: move cursor forward / backward
to decimal mode: enter number, cursor automatically advances
accept the entry and return
abandon the entry and exit