User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-9
TiL 09RE405
The user may edit the Noise Squelch value as follows:
to decimal mode: enter number, cursor automatically advances
accept the entry and return
abandon the entry and exit
L1-9.2 Select CTCSS Tone
Scope: analog only, receive & transmit, 42 tones (67Hz to 254.8Hz)
If CTCSS Tones are chosen, the prompt line will display the current value for that tone:
0 0 5 T e s t n 1 5 6 . 0 0 0 0 R t
C T C S S T o n e ( ↑ ↓ , # * ) : 6 7 . 0
FIGURE 2-9 User Screen to Edit the CTCSS Tone Value
The user may select from the available tones (Appendix A lists the available choices), as follows:
step up/down through available CTCSS Tones
accept the entry and return
abandon the entry and exit
L1-9.3 Select DCS Code
Scope: analog only, receive only, 83 codes (23 to 754)
If DCS Codes are chosen, the prompt line will display the current value for that code:
0 0 5 T e s t n 1 5 6 . 0 0 0 0 R c
D C S C o d e ( ↑ ↓ , # * ) : 2 3
FIGURE 2-10 User Screen to Edit the DCS Code Value
The user may select from the available choices (Appendix A lists the available choices), as
follows:
step up/down through available DCS Tones
accept the entry and return
abandon the entry and exit