User's Manual
TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Operating Instructions Page 2-4
TiL 09RE405
TABLE 2-2 ABBREVIATIONS AND SYMBOLS USED
Abbreviation
& Symbols
Section /
paragraph
DESCRIPTION
MN/GD
2-1
Command that is valid in both Main and Guard
MN
2-1
Command that is valid for Main only
Blank
2-1
Command that is not subject to channel restrictions
#
2-2
A
ccept the entry and return
*
2-2
Abandon the entry and exit
w
L1-3
Channel Operating mode Analog Wide (25 kHz)
n
L1-3
Channel Operating mode Analog Narrow (12.5 kHz)
D
L1-3
Channel Operating mode Digital (12.5 kHz)
L1-5, L2-3 The lock symbol indicates that all keypad keys are disabled.
$
L1-9.1, L3-3
($) symbol is used when indicating a Hexadecimal number, 0-16 ($0-$F).
•
2-26
Shows a command that has a distinct permission.
•
2-26
Shows a command that is available in Guard, but permission is controlled by
Main.
X
2-26
Shows a command that is NOT available for the channel.
Rx, Tx
L1-9, L2-9, L3-
9, L4-9
Analog squelch mode 'x' is the default squelch mode (noise squelch).
Rt, Tt
L1-9, L2-9, L3-
9, L4-9
Analog squelch mode 't' indicates that both receive and transmit use CTCSS
tone selective squelch. The tones may be the same or different for receive or
transmit.
Rc, Tc
L1-9, L2-9, L3-
9, L4-9
Analog squelch mode 'c' indicates that both receive and transmit use DCS
(digitally coded squelch) code selective squelch. The codes may be the same
or different for receive or transmit.
T-
L1-9, L2-9, L3-
9, L4-9
Analog squelch mode '-' is valid for transmit only, and indicates that transmit
is disabled for this memory.
Rm
L1-9, L2-9, L3-
9, L4-9
Digital squelch mode 'm' is valid for receive only, and indicates that any non-
encrypted P25 compliant digital signal, regardless of NAC or TalkGroup
setting, will be received.
Rn
L1-9, L2-9, L3-
9, L4-9
Digital squelch mode 'n' is valid for receive only, and indicates that any non-
encrypted P25 compliant digital signal, having the correct NAC, will be
received.
Rg, Tg
L1-9, L2-9, L3-
9, L4-9
Digital squelch mode 'g' is valid for receive and transmit only. For receive it
indicates that any non-encrypted P25 compliant digital signal, having the
correct NAC, and the correct TalkGroup will be received. For transmit it
indicates that the specified NAC and TalkGroup codes will be transmitted.
Ti
L1-9, L2-9, L3-
9, L4-9
Digital squelch mode 'i' is valid for transmit only, and indicates that the
transmitted signal will carry the ID of a specific radio. Only a radio with that ID
programmed as its UNIT ID, should be able to receive that signal.
T-
L1-9, L2-9, L3-
9, L4-9
Digital squelch mode '-' is valid for transmit only, and indicates that transmit
is disabled for this memory.