Installation and Operating Instructions

TECHNISONIC INDUSTRIES LIMITED
T6 Multiband Transceiver Module Operating Instructions
TiL 22RE638 Revision A
1
1.1 INTRODUCTION
This publication provides operating information for the T6 multiband transceiver module.
1.2 DESCRIPTION
The T6 multiband transceiver module is designed to be installed in an airborne multiband radio
such as one of the TDFM-9000 series transceivers. The T6 module can operate on the following
bands:
Band
Frequency Range
Modulation
Usage
VHF LO
30 to 50 MHz
FM
VHF
108 to 118 MHz
AM
Navigational Beacons
Receive only
VHF
118 to 138 MHz
AM
Civilian Aeronautical
Communications
UHF
225 to 400 MHz
AM
Military Aeronautical
Communications
The T6 module has no physical user interface. All control of the module is performed through a
serial RS232 interface. The operating instructions in section 2 assume an installation in a
Technisonic TDFM-9100 transceiver.
SECTION 1: GENERAL DESCRIPTION