Installation and Operating Instructions

TECHNISONIC INDUSTRIES LIMITED
T6 Multiband Transceiver Module Operating Instructions
TiL 22RE638 Revision A
8
3.3 INSTALL T6 MODULE
Fit module into top tray position ensuring proper header connection.
Install 4 screws holding the module tray.
Install 6 hex head screws into the heat sink block.
Connect the antenna coax as shown above.
Install new top cover #218212.
3.4 FINAL ALIGNMENT AND TEST
Perform final alignment procedure for appropriate transceiver model.
Perform final test procedure for appropriate transceiver model.