User's Manual

FCC ID LABELS
Before the T3100 is installed in the TDFM-9300, the FCC/INDUSTRY CANADA label must be applied.
FIGURE 2: T3100 RF Module with FCC/IC Label applied to the bottom
The FCC/Industry Canada label is shown below. Place the label on the bottom of the controller board as
shown in Figure 2.
FIGURE 3: T3100 FCC/Industry Canada Label
INSTALATION
The T3100 module should be installed in the TDFM 9300 in accordance with TIL document 136569
“TDFM-9300 FINAL ASSEMBLY SSP".
The T3100 is intended to be mounted in the TDFM 9300/9200 chassis and is not visible. Therefore, a
second label must be applied to the outside of the TDFM 9300 that contains the following text:
“TDFM 9300 Multiband Transceiver. Contains Module: FCC ID IMA-T3100”.
In addition, external labeling for Industry Canada shall be applied to the TDFM 9300 to include the
following text: “Contains IC: 120A-T3100”.