User's Manual

2-4
The following settings must be programmed for each mode in a Trunked (SmartNet or SMARTZONE) Radio:
System Type TG Strapping
System ID Zone
Individual ID Scan List
Coverage Type Scan Type
Affiliation Type Interconnect
Control Channel 1 Phone Display Format
Control Channel 2 Private Call
Talkgroup 1 Private Call Type
Talkgroup 2 Private Call Operation
The function keys along with the rest of the key pad, revert to normal number keys during transmit and when NUM
LOCK is selected by pressing the rotary knob.
2.7 MUP AND MDN KEYS
These keys provide the same function as the rotary knob does when it is set to CHAN. This equates to the 16 position
rotary knob on the portable. When one of these keys is pressed, the function of the rotary knob is automatically set to
CHAN.
2.8 UP AND DN KEYS
The keys provide the same function as the left and right arrow keys on the portable. The UP key equates to the right
arrow key. These keys are used for a variety of functions but in the normal mode they are used to scroll through the
soft key menus.
2.9 BRT AND DIM KEYS
Use these keys to dim or brighten the display. The radio powers up at full brightness for normal use but can be
dimmed for night operations.
2.10 ESW KEY
The ESW key provides the function of the concentric or ‘ergo’ switch on the portable. The switch has two conditions
which are represented by ‘O’ and ‘∅’. Pressing the ESW key toggles the condition back and forth. The condition is
displayed at the bottom of the display, second character from the right. The ergo switch condition is saved when the
unit is turned off. There are separate conditions for each band installed. The ESW key can be programmed with the
CPS™ to a variety of functions such as low power, scan, channel, and secure mode.
2.11 TSW KEY
The TSW key provides the function of the toggle switch on the portable. The switch has three conditions which are
represented by ‘A’, ‘B’ and ‘C’. Pressing the TSW key toggles the condition A,B,C,A,B, etc. The condition is displayed
at the bottom of the display, last character on the right. The toggle switch condition is saved when the unit is turned off.
There are separate conditions for each band installed. The TSW key can be programmed with the CPS™ to a variety
of functions such as low power, scan, channel, and secure mode.