User's Manual

APPENDIX A 11RE439 Rev N/C
A-7
CHANNEL SELECTION PULLDOWN
1 CHANNEL TRANSCEIVER
Figure 6
6 CHANNEL TRANSCEIVER
Figure 7
The x Channel(s) pull-down tab allows you to select for single or six channel AM transceiver use.
The frequency editing window changes accordingly. The “W” indicates that the channels are
25kHz (Wide) channel spacing and as such, only channels in 25kHz increments are accepted. Be
sure to set the channel pulldown appropriately for your transceiver otherwise frequency
programming may be unpredictable.