User's Manual

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TMS-100 90-6R/8.33
Installation & Operating Instructions
TiL 02RE301 Rev B
2-3
2.4.1 PROGRAMMING CHANNEL FREQUENCIES
Having ascertained the desired operating frequencies for each channel, continue as follows:
(1) Run the TDP-90 program on the computer.
(2) Click on the Data pull-down list and select the serial port to which the transceiver is
connected.
(3) Set the program for 1 or 6 channels as applicable.
(4) Turn on power to the transceiver.
(5) Click on the Up icon to retrieve the frequencies from the radio. You will see activity in the
Terminal window as data is being transferred.
(6) Edit the frequencies as desired.
(7) Click on the Dn icon to copy the frequencies to the transceiver. You will see activity in the
Terminal window as data is being transferred.
(8) Click on the diskette icon to save the file.
(9) Click on the printer icon to print a hard-copy of the frequencies.
(10) Turn off power to the transceiver.