Operation Manual

33
8.2.2 Pause/freeze frame
> To pause playback of a recording (Freeze frame), press the Pause / Play button
during playback.
> Press this button again to resume playback.
8.2.3 Fast forward/rewind
Your DVR has fast forward/rewind functions so you can get to a specific place in a recording.
> Press the Fast forward or rewind button during playback.  or  appears
in the previously mentioned small Infobox. The recording is played back at 4x speed
in the selected direction.
> If you press the Fast forward or Fast rewind button again, the speed will
increase to 16x and the message “” or “” appears.
> If you press the Fast forward or Fast rewind button again, the speed will
increase to 64x and the message “” or “” appears.
> Pressing the Fast forward or Fast rewind button again causes you to jump
forwards or backwards in 10 minute increments.
> When you get to the place you want in the recording, you can return to normal playing
mode by pressing the Play / Pause button.
8.2.4 Jogshuttle function
To quickly and accurately navigate to a position in the recording, your receiver also has a
'jog shuttle' function. This is used as follows:
> During playback press the Jogshuttle button (freeze frame) to access jogshuttle
mode.
Playback of the recording is halted (freeze frame) and “II” is displayed in the Infobox.
8.2.5 Skipping to tags
During playback you have the option of navigating directly to locations in the recording
where you have set tags.
> Using the option selection under the Tag menu item, select the tag to skip to the
location you want in the recording.
8.2.6 Ending playback
> Press the Stop button to end playback.
Playback will end and your TV will return to TV mode. In doing so the television "notices"
the place in the recording where playback ended. If you start playing this recording back
again, it will automatically resume at the point where you previously left off.
DVR playback
ENNL ESCZ FRPL ITHU