Operation Manual

17
5.3.3 Stop mode
Many teletext pages consist of multiple subpages. This is shown by two numbers separat-
ed by a slash (current subpage/number of subpages) in the teletext image. As soon as a
new subpage is available, it is displayed automatically.
> Press the STOP button to stop the device from switching the subpage
automatically.
The current subpage will now remain on the display.
> Press the button once more to re-activate automatic switching to the next
subpage.
5.3.4 Teletext subpages
In addition to stopping the device from switching between subpages automatically, you
may also select and display specific subpages.
Please note that the operation of the TV teletext decoder and the operation of the DVB
teletext decoder differ from one another in this case.
5.3.4.1 DVB teletext decoder
> First, press the OK button to open the subpage selection screen.
A list of unread teletext subpages is displayed on the left side of the display.
> Use the up/down arrow buttons to highlight the teletext subpage that you
would like to view.
> Press the OK button once again to exit the subpage selection screen.
5.3.4.2 TV teletext decoder
> First press the SUBPAGE button.
The yellow field on the bottom corner of the screen now switches to the subpage
selection screen.
> Use number buttons 0 through 9 to enter the four-digit number for the desired
teletext subpage.
For example:
0, then 0, then 0, then 1 for subpage 1
> Press the SUBPAGE button once again to exit the subpage display.
5.3.5 Increasing the size of the teletext display
for the TV teletext decoder only
> Use the SIZE button to switch between three different display options: increase
the size of upper half, increase the size of lower half and display the teletext in
normal size.