Quick start manual and warranty documentation TechniVision 22 / 26 / 32 HD
Rear of TV TechniVision 22 HD 1 Illustrations Rear of TV TechniVision 22 HD (connections, attachment, cover) 5 1 6 2 7 3 10 11 8 9 4 1 2 3 4 5 6 12 Antenna input (DVB-C, DVB-T, analogue) LNB Input (DVB-S) Common Interface USB port DC socket S-Video input 13 14 1516 7 17 Audio input (R, L) (S-Video, Video and component input) 8 Video input 9 Component input 10 Cable guide 11 Stand attachment cover 12 HDMI input 2 2 18 13 HDMI input 1 14 Audio output digital (S/P DIF electrical) 15 Headpho
Rear of TV TechniVision 26/32 HD EN Rear of TV TechniVision 26/32 HD (connections, cover) 1 2 3 4 5 6 9 10 11 7 8 12 1 2 3 4 5 6 USB port Common Interface LNB Input (DVB-S) Antenna input (DVB-C, DVB-T, analogue) S-Video input Audio input (R, L) (S-Video, Video and component input) 7 8 9 10 11 12 13 14 13 14 1516 17 Video input Component input Mains power switch Mains power connection Stand attachment cover HDMI input 2 HDMI input 1 Audio output digital (S/P DIF electrical) 3 18 15 Headphon
Remote control Remote control On/Standby Sleep timer Remote control code Sound on/off Numeric keys Recording TV/Radio mode Stop Rewind Fast forward Pause / playback Arrow keys SFI DVR mode Page up Page down Back Info OK Function selection Programme +/- Volume +/Option selection Function keys Menu Timer Teletext Freeze frame / Jogshuttle Zoom/Format Language selection PaT Genre 4
Front of TV Display EN Front of TV (Display) LED IR receiver Display 5
Important instructions 2 Please read this first Dear customer, This quick start manual simply describes the most important connection options and the basic operating steps required for you to quickly get started operating the TechniVision 22, TechniVision 26 or TechniVision 32.
Important instructions Only operate the receiver in a temperate climate. Do not switch on the TV immediately after delivery or transportation in cold weather; wait until it reaches room temperature. Do not expose the set to dripping or sprayed water. If water gets into the unit, immediately remove the mains plug and advise the service department. Do not place the TV on a narrow shelf or in small cabinets; ensure a minimum ventilation gap of 10cm around the unit.
Important instructions The materials can be re-cycling in accordance with their labelling. By ensuring that valuable raw materials are re-used you can make a valuable contribution towards protecting our environment. Please contact your local authority for the location of the nearest recycling point.
Remote control EN 3 Remote control 3.1 Changing the battery > Open the cover on the battery compartment at the rear of the remote control by pushing it in the direction of the arrow and then lifting it off. > Insert the supplied batteries, ensuring that the poles are the right way around (indicator visible in battery compartment). > Close the battery compartment again. 3.
Connecting 4 Connecting a Connecting the satellite antenna using the LNB input. b Connecting the cable connection (digital and/or analogue) or the DVB-T antenna to the antenna input on the television. c Connecting the television to a BluRay/DVD player using an HDMI cable or a cinch components cable with the cable adapter. d Connecting the digital audio output to Hi-Fi stereo equipment or surround sound equipment.
Connecting EN The following references a b c d refer to the example connection on page 10. 4.1 Satellite antenna a Connect LNB input 1 on the TV to your external unit using a suitable coaxial cable. 4.2 Antenna/cable connection (analogue and digital) b Connect the antenna input for the LCD TV to either a terrestrial antenna or to the connection socket for the cable or antenna connection. Use the TechniSat DVB C/T Switch (Part No.
Basic operation 5 Basic operation Dear Customer, the following section starts by covering basic operation as well as recurring operating steps for the TV. This should make it easier to read the instruction manual, since it avoids repeated description of identical steps at each individual stage. The so-called "On Screen Display" is used on your television.
Basic operation The following example will illustrate how you reach the main menu and call up a submenu. The objective of the example is to call up the Picture settings menu. > Press the Menu button. The main menu appears on the screen. > Select the Settings menu item by moving the highlight over this item using the arrow keys. > Press the OK button to open the Settings menu. 13 EN 5.
Basic operation > Use the up/down arrow keys to highlight the Picture settings item. > The Picture settings menu is opened by subsequently pressing the OK button. You can also highlight the individual menu points in the same way as you highlight an item on a submenu to open it and alter the respective settings. The menu items in some menus have to be highlighted by moving sideways. This is done by pressing the right/left arrow keys.
Basic operation In some menus and functions the changes made must be accepted manually in order to save them permanently. If this does not happen, the values that existed before leaving the menu or the function will be reset automatically. If an Accept field or the green function key with Accept is displayed in the bottom line of the screen, you can see that the changes made must be saved manually to be accepted.
Basic operation 5.4.1 Arrow selection method > If is shown on the left and on the right next to the set value, you can alter this using the left/right arrow keys. 5.4.2 Selection list If is shown on the right next to the set value, the value is changed using the selection list. > Press the OK button to open the selection list. > Highlight the setting you want using the up/down arrow keys.
Basic operation Enter the new setting you want using the numeric keypad key if a question or a number value or is shown inside the highlight. mark > Note the number of digits used in the entry as there must always be the same number used. This means that if a five-digit value is required, for example “10600", but you only wish to set a four-digit value, for example “9750“, then you must enter a “0” at the beginning for every unused location.
Basic operation The SMS keyboard is operated using the numeric keypad key on both the alphabetic and the QWERTY keyboard and can be used at any time. Therefore the coloured buttons incorporate the functions described above. > Press one of the numeric pad keys 0 - 9 and select the various letters, numbers, characters and symbols. The first letter of the respective row of characters is highlighted after first pressing a numeric keypad key.
Basic operation You have the option in some menus and operating modes (e.g. TV mode, music/images playback etc.) to call up additional functions and options using option selection. > Pressing the Option button opens the option selection in the lower right-hand corner of the screen. In this example we can see the option selection for the channel list. > Every additional press of the Option button moves the highlight down one line each time. Some options are selected directly in this window.
Initial installation 6 Initial installation On initial installation of the TV, the installation wizard starts AutoInstall automatically. Using the installation wizard is the simplest way for you to create the most important settings for your TV. The initial installation process shown here serves merely as an example. The exact process for the initial installation will depend on the settings you select. Therefore please follow all instructions displayed on screen carefully.
Initial installation EN Display mode > Use the up/down arrow keys to select your preferred display mode and confirm by pressing the OK button. The values preset by the selected displayed mode can be adjusted as you want after AutoInstall, in the main menu under Settings > Picture settings. When selecting the intensive display mode, note the message(s) that appear and confirm by pressing the OK button.
Initial installation Antenna configuration (DVB-S) In this step of the installation you can adjust your TV setup to the configuration of your satellite antenna. If the DVB-S source has been deactivated, this page of the installation wizard does not appear; you are taken directly to the “Antenna configuration (DVB-T)” page instead. > Press the OK button to accept the default antenna setting and continue with the “Antenna settings (DVB-T)” section.
Initial installation You have various options for searching for new channels or updating the channel list. You can use the ISIPRO service list function to download a new satellite channel list for your TV from the satellite or run a channel search. > To download the available current channel list, use the up/down arrow keys to highlight the ISIPRO - service list update line and start the process by pressing the OK button.
Initial installation Regional programmes Some broadcasters transmit channels with varying regional content. On this page you can define your preferences for these regional channels. > Using the arrow keys highlight the channel provider for the preferred regional programme you wish to set up and select this using the selection list. If you subsequently select another regional programme for a programme provider as per point 7.2.4, this will be saved in the same way for this programme provider.
Initial installation Your TV has the SFI (SiehFernInfo) electronic programme guide. To enable the data for the electronic programme guide to be displayed, it must first be downloaded. To do this, your TV automatically starts downloading the SFI data as soon as any software updating has been completed. This process can take up to 30 minutes. > If you do not want to wait for the SFI data to be downloaded, you can skip this process by pressing the Info button.
Operating the unit 7 Operating the unit 7.1 Switching the TV on and off 7.1.1 Switching on using the mains power switch on the TV (only with the TechniVision 26/32 HD) > Switch the TV on by pressing in the mains power switch (see page 3 #9). The TV now performs an initialisation and cannot be operated during this time. This process takes several seconds to complete. 7.1.
Operating the unit 7.2.1 Using the channel up/down buttons > You can switch between channels one at a time using the Channel +/- buttons on the remote control or on the TV. 7.2.2 Using the numeric pad keys > Use the numeric keypad keys to enter the number of the channel you want. For example: 1 for channel slot 1 1, then 4 for channel slot 14 2, then 3, then 4 for channel slot 234 1, then 2, then 4, then 5 for channel slot 1245 When entering channel numbers with several digits, you have approx.
Operating the unit 7.2.3.2 Selecting a list To make it easier for you to find channels, your receiver provides various channel lists. You can select your favourites lists or display the channels sorted alphabetically from the list of all channels, the TV provider lists or according to genre. > Press the OK button to open the active channel list. > You can now use the option selection to select the channel list you want (TV list, All Channels, TV provider lists and Tv genre lists).
Operating the unit > Press the AV button to open the AV sources selection window to select a device connected to the HDMI inputs (HDMI 1/2), component input (YPbPr), Scart socket (EuroAV), VGA port (VGA), video port (Video) or S-Video port (S-Video). > Select the source you want using the up/down arrow keys and confirm by pressing the OK button to switch over to the selected input. To do this also note points 7.2.1 and 7.2.3 in the quick start manual. 7.4 Channel/Source information 7.4.
Operating the unit 7.5 Receiving encrypted channels > Insert a CI-/CI+- module with the upper side pointing to the rear in the slot. > Insert the smartcard into the CI / CI+ module card slot. 7.5.1 Smartcard PIN code With encrypted channels, programmes that are not suitable for children can be pre-blocked by means of a parental control code/symbol. To unblock the specific programme it is necessary to enter the Smartcard PIN code stored on the Smartcard.
Operating the unit You can use the display mode selection option to switch between the preset display modes during actual operation: natural (home use), intensive (presentation), movie (cinema) and PC (graphic), as well as the fully customisable user-defined display mode. > You can select the display mode you want using option selection under the Display mode menu item. 7.9 Subtitles When switching to a programme being broadcast with subtitles, the subtitles symbol appears in the Info box.
Operating the unit 7.11 Format switchover / Zoom > By pressing the Zoom/Format key you can switch between the various predefined formats (original, optimum, optimum 16:9, full zoom and stretch). The display format selected is displayed at the lower edge of the screen. > To hide the format switching screen, press the Back button. 7.12 Freeze frame > The television picture is displayed as freeze frame by pressing the Freeze frame button.
Operating the unit Your TV has "SiehFern Info" electronic programme information. You can use this to display programme information for a single or a number of digital channels on the screen and to obtain a very quick overview of the current programmes, or programmes being broadcast that day, or on the following days. > Press the SFI button to call up the electronic programme guide. The electronic programme guide is displayed, using the selected start category.
Operating the DVR 8 Operating the DVR The DVR function (DVR=Digital Video Recorder) means you no longer have to use an external recorder (e.g. video or DVD recorder) to record programmes, as you can use this function to record them to an attached USB storage device. The recording capacity thus depends on the volume of data in the broadcast material and the size of the attached storage medium. DVR recordings of channels from DVB-S, DVB-C and DVB-T sources can be made.
Operating the DVR > Pressing the Stop button causes an enquiry to appear as to whether the recording should be saved or discarded. > Select Save to save the recording, or Discard not to save the recording, or Back to continue with the recording. 8.1.4 Ending recording automatically > Pressing the record button causes a window to open containing all available functions. > You can, for example, select +1 hour for which the TV should continue to record the channel and then automatically stop recording.
Operating the DVR 8.2.2 Pause/freeze frame > To pause playback of a recording (Freeze frame), press the Pause / Play button during playback. > Press this button again to resume playback. 8.2.3 Fast forward/rewind Your DVR has fast forward/rewind functions so you can get to a specific place in a recording. > Press the Fast forward or rewind button during playback. XX or WW appears in the previously mentioned small Infobox. The recording is played back at 4x speed in the selected direction.
EN 37
Guarantee 5 TechniSat Guarantee Years Guarantee Dear Customer, You have purchased a high quality TechniSat product that has been put through multiple quality tests and a stringent goods outwards check at every stage. Should you still encounter a problem with your equipment, contrary to expectations, you can always take advantage of a two-year legal warranty claim. This warranty claim can of course be exercised at any time without having registered the product.
EN Guarantee Guarantee information The guarantee can only be invoked if: 1. the fully completed registration card has been received by us no later than 4 weeks after purchase, or you have registered the product online during this period. 2. you have first attempted to resolve the issue by contacting your dealer or our technical service department at +49 (0)180/5 00 59 07 (0.14 Euro/min from German landlines, other tariffs apply for calls from abroad or from mobile networks). 3.
Service Report in the event of a claim under warranty If you encounter a problem with your equipment despite the ultra-modern manufacturing and constant quality checking, we would ask you to first contact your dealer or our technical service department +49 (0)180/5 00 59 07 (0.14 euro/min from German landlines, other tariffs apply for calls from abroad or from mobile networks). If we cannot solve the problem in this manner, we would ask you to contact your dealer or supplier.
EN Service Report in the event of a claim under warranty Description of fault Please briefly explain the problem with your equipment Please note that a repair under guarantee can only be carried out quickly and smoothly if this Service Report is completed in full and submitted with a proof of purchase (delivery note, invoice, till receipt etc), the defective equipment in the original packaging, including all accessories (e.g. network cable, remote control) and a precise description of the problem.
EN 43
Your receiver bears the CE symbol and complies with all requisite EU standards. Subject to change for amendments and printing errors Version 04/11 Duplication and reproduction only with the publisher's approval TechniVision 22 HD, TechniVision 26 HD, TechniVision 32 HD and TechniSat are registered trademarks of TechniSat Digital GmbH PO Box 560 54541 Daun www.technisat.com Technical Hotline Mon. - Fri. 8am - 7pm +49 (0) 180/5 005907 (0.
