Supplementary instructions for 3D reproduction with TechniPlus ISIO
Dear customer, Your TechniSat TechniPlus ISIO device has the option to reproduce 3D. The functioning and the related adjustment steps are not included in this manual. For this reason, please note the following tips and adjustment steps. Health and Safety Warnings While viewing moving images some people can get such symptoms as over exercising, crams, nausea, eye fatigue, dizziness or unconsciousness.
D-/2D- Playback mode > Select the desired display mode, under the option 3D using Option (see point 5.5) in the instruction manual. When using the setting off, the image on the screen will be displayed in the way it is transferred from the respective sender. Select the point 3D mode and continue with the step 3D mode for displaying 3D. Select the point 2D mode and continue with the step 2D mode for displaying 2D.
2D-Mode The images transmitted in 3D can be displayed as “normal” pictures with the 2D-mode. > Select the point 2D-Mode in the options for displaying 3D contents in 2D. A new request appears. > Select Side-by-side when the images shall be displayed side by side. > Select Top-and-bottom when the images shall be transmitted on top of each other.
